RCF NX 12-SMA Active Coaxial Stage Monitor

RCF
Compare
  • 1400 Watt Peak, 700 Watt RMS digital bi-amplification
  • 129 dB max spl
  • 60° x 60° constant directivity horn
  • 12″ High power neodymium woofer, 2.5″ voice coil
  • 1.7″ kapton dome, 1″ exit, neodymium high frequency driver

$2,315.99 CAD

In stock

Description

The NX 12-SMA is equipped with new high power 700 W digital amplifier and a newly designed 12” coaxial neodymium transducer that guarantees outstanding audio quality and definition as well as an extremely lightweight of the final system. The NX 12-SMA can be also used as a portable PA system, thanks to the rugged powder coated steel pole mount installed on the side. In order to control the response of the speaker in such different applications, RCF has incorporated two special Equalization Modes:

  • Floor, for stage monitoring
  • Free Field, for the use of the speakers as a stand-alone PA system

Cabinet is made in Baltic Birch plywood, finished with an extremely resistant paint for an extensive use on the road.
An ergonomic side handle, integrated with the input panel, is provided for an easier transport of the speaker.

STATE OF THE ART COAXIAL DESIGN

COAXIAL NEODYMIUM TRASDUCERS

The newly designed coaxial neodymium transducers guarantee an outstanding audio quality and definition as well as an extremely lightweight of the final system.

COMPLETE ABSENCE OF FEEDBACK

The advantages of the coaxial transducers are the complete absence of feedback and, thanks to the coherent single spherical wave front with a perfect dispersion control, a perfect listening in every position.

SINGLE NEODYMIUM RING

The large sized single neodymium ring magnet provides an extremely high flux density and BL factor.

HYPER-VENTED BASKET

Both the new transducers are equipped with a new hyper-vented basket and magnetic assembly that provide an excellent heat dissipation and lower power compression.

AMPLIFICATION

The NX Coaxial Stage Monitors are provided with brand new digital amplifiers with powerful DSP processing. A 400 W module that delivers 300 W for the low frequencies and 100 W for the high frequencies powers the NX 10-SMA. The NX 12-SMA and NX 15-SMA are equipped with a 700 W amplifier, 500 W feed the low frequencies and 200 W are used for the high frequencies.

FULLY FEATURED INPUT BOARD

The input board is fully equipped in order to configure the stage monitors for any stage situation.

– XLR Input and Output Link
– Jack Input
– Volume
– Input Sensitivity Switch
– Free Field – Floor Switch
– Status LEDs
– Powercon AC Input and Output Link

ERGONOMIC HANDLE

Cabinets are made in Baltic Birch plywood, finished with an extremely resistant paint for an extensive use on the road. An ergonomic side handle, integrated with the input panel, is provided for an easier transport.

MAXIMUM FLEXIBILITY

NX Series maximum flexibility philosophy has been maintained for these two new additions; it is possible, in fact, to use the NX 10-SMA, NX 12-SMA and NX 15-SMA as a portable PA system, thanks to the rugged powder coated steel pole mount installed on the side.

SPECIAL EQUALIZATIONS

In order to control the response of the speakers in such different applications, RCF has incorporated two special Equalization Modes:

– Floor, for stage monitoring;
– Free Field, for the use of the speakers as a stand-alone PA system.

Additional information

Weight 36.3 lbs
Dimensions 16.4 x 21.6 x 12.7 in

Features

RCF NX 12-SMA Active Coaxial Stage Monitor Features:

  • 1400 Watt Peak, 700 Watt RMS digital bi-amplification
  • 129 dB max spl
  • 60° x 60° constant directivity horn
  • 12″ High power neodymium woofer, 2.5″ voice coil
  • 1.7″ kapton dome, 1″ exit, neodymium high frequency driver
  • DSP processing, floor – fre field equalization, soft limiter and protection
  • Combo xlr/jack input, xlr signal output

Applications:

  • Main vocal stage monitor
  • High-output drum or keyboard monitor
  • Main PA in small venues

Specifications

ACOUSTICAL SPECIFICATIONS

  • Frequency Response -3 dB:50 Hz ÷ 20000 Hz
  • Max SPL:129 dB
  • Horizontal coverage angle:60°
  • Vertical coverage angle:60°
  • Compression Driver:1.7″ kapton dome, 1″ exit, neodymium
  • Woofer:12″ neo high power woofer, 2.5″ voice coil

INPUT/OUTPUT SECTION

  • Input connectors:xlr, jack
  • Output connectors:xlr

PROCESSOR SECTION

  • Limiter:Soft Limiter
  • Controls:Freefield, floor

AMPLIFIER SPECIFICATIONS

  • Total power:1400 W PEAK
  • High frequencies:400 W PEAK
  • Low frequencies:1000 W PEAK
  • Total power:700 W RMS
  • High frequencies:200 W RMS
  • Low frequencies:500 W RMS

CABINET

  • Cabinet Material:Baltic Birch
  • Handles:1 on side
  • Pole Mount/Cap:yes
  • Grille:steel

PHYSICAL SPECIFICATIONS

  • Height:324/12.7 mm/inch
  • Width:550/21.6 mm/inch
  • Depth:417/16.4 mm/inch
  • Net Weight:16,5/36.3 kg/lbs

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.