DBX ZonePRO 1261m – 12×6 Digital Zone Processor

DBX
Compare
  • 12 Inputs / 6 Outputs
  • 6 Balanced Mic/Line Inputs
  • 4 Unbalanced, Mono-Summed RCA Input Pairs
  • S/PDIF Input
  • Microphone Gain per Channel
  • Pre-Configured Architecture

$1,096.00 CAD

SKU: 691991401190 Category: Tag: Model Number: ZonePro 1261m

Description

About DBX ZonePRO 1261m – 12×6 Digital Zone Processor

The dbx ZonePRO 1261m – 12×6 digital zone processor offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus. The 1261m features a total of 12 inputs and six outputs. Inputs include six balanced mic/line switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one S/PDIF input for up to two digital channels. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.

The dbx ZonePRO 1261m – 12×6 digital zone processor device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth®, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone. A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required. The front panel of the 1261m features a power status LED, a network traffic LED, and an RS-232 control port. Additional system control is offered in the form of optional Zone Controllers.

This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control. All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information). ZonePRO Designer—the configuration, control and monitoring software for the ZonePRO family of devices—offers control of the dbx ZonePRO 1261m – 12×6 digital zone processor via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-bystep configuration process of the 1261m. The ZonePRO® products have long been the obvious choice for managing commercial audio applications. They’re easy to install and use – thanks to step-by-step setup wizards – and they’re backed by long track record of dbx reliability. The fact that so many are in use in locations worldwide speaks to their popularity and dependable performance.

Recommended for: Installed.

Features

DBX ZonePRO 1261M Digital Zone Processor Features:

  • 12 Inputs / 6 Outputs
  • 6 Balanced Mic/Line Inputs
  • 4 Unbalanced, Mono-Summed RCA Input Pairs
  • S/PDIF Input
  • Microphone Gain per Channel
  • Pre-Configured Architecture
  • Two Configurable Input Insert Positions
  • One Configurable Output Insert Position
  • AutoWarmth® per Output Zone
  • Link Bus
  • Optional ZC Controllers
  • Ethernet Control
  • Serial Control
  • Third Party Control
  • Wizard-Driven Configuration

Specifications

DBX ZonePRO 1261M Digital Zone Processor Specifications:

Input12 Total – (6) Balanced Mic/Line Inputs, (4) Unbalanced, Mono-Summed RCA Input Pairs, S/PDIF Input
Input TypeEuroblock (Mic/Line), RCA (Source)
Input ImpedanceEuroblock: >50kΩ Balanced, >25kΩ Unbalanced, RF Filtered; RCA: >25kΩ Unbalanced, RF Filtered
Max Input+20dBu Mic/Line, +12dBu RCA
CMRR> 40dB, typically >55db @ 1kHz
Mic Preamp gain30 to 60dB
Mic Preamp Equivalent Input Noise (EIN)< -118dBu, 22Hz-22kHz, 150Ω Source Impedance
Mic Preamp Phantom Power15V
Output6 Total
Output TypeElectronically Balanced, RF Filtered Euroblock
Output Impedance120Ω Balanced, 60Ω Unbalanced
Max Output+20dBu
A/D Converterdbx Type IV™ Conversion System
A/D Dynamic Range(line) >113dB, A-weighted, >110dB unweighted
Type IV Dynamic Range>119dB, A-weighted, 22kHz; BW: >117dB, unweighted, 22kHz BW
Sample Rate48kHz
D/A Dynamic Range112dB A-weighted, 109dB unweighted, 22kHz BW
Dynamic Range>110dB A-weighted, >107dB unweighted, 22kHz BW
THD+Noise0.003% typical at +4dBu, 1kHz, 0dB gain
Frequency Response20Hz – 20kHz, +/- 0.5dB
Interchannel Crosstalk>80dB typical
Propagation Delay0.8 msec
Operating Voltage100-240 VAC, 50/60Hz
Power Consumption27 W
BTU<92.13
Unit Weight6.2 lbs / 2.81 kg
Shipping Weight8.35 lbs / 3.78 kg
Dimensions1.75” (1U) x 19” x 7.75” (45mm x 483mm x 197mm)
Safety Agency CertificationsUL 60065, IEC 60065, E 60065, EN 55013

Additional information

Weight8.35 lbs
Dimensions19 x 7.75 x 1.75 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.