DBX 1066 Compressor / Limiter / Gate

DBX
Browse Wishlist
Compare
  • Selectable auto (classic dbx®) or manual compression
  • Selectable Overeasy® or Hard Knee compression modes
  • PeakStopPlus™ limiting
  • True RMS level detection
  • Switchable +4dBu or -10dBV operation per channel
Browse Wishlist

$629.99 CAD

In Stock

SKU: 691991400018 Category: Model Number: 1066

Description

After producing the world’s most renown series of compressors, the task of producing a new compressor worthy of our reputation would be daunting for most engineers. Not for dbx®. Our engineers know audio like no one else in the world. Now the fruits of their talents are available to you in the form of the 1066 Stereo Compressor/Limiter/Gate. Want to instantly add that classic dbx response to your mix? It’s there at the touch of the “Auto” button. Or use the independent Attack and Release controls to tailor the 1066 to your specific needs. Unwanted frequencies or mic bleed in the signal path? Frequency dependent gain control is a snap to set up and execute with our Side Chain External button (SC Ext). Use the Side Chain Monitor button (SC Mon) and your favorite EQ to dial in the specific frequencies you want to trigger the device. As has become our standard, the contour switch allows entire mixes to be easily smoothed with soft compression while keeping low frequencies from punching holes in the overall mix. Selectable input and output metering allow you to make sure that everything is matched up level-wise, maximizing your signal-to-noise ratio.

For overall speaker protection, our new PeakStopPlus™ does all previous circuits one better. With a new design, the PeakStopPlus represses those unwanted transients from blowing your drivers while minimizing the distortion common to many other “hard” limiters. Selectable Hard-Knee or OverEasy® characteristics make the 1066 ideal for your gain control needs, whether you’re looking for “heavy” almost-special-effects compression or soft, smooth gain leveling. New lightpipe technology replaces standard LED’s found on most other units, making the 1066 both very easy to read and much easier to operate. In the studio, broadcast facility or on the road with a P.A. system, the 1066 is designed for perfectly simple operation. The dbx 1066 compressor / limiter / gate allows you to eliminate unwanted signals, flexibly control overall signal gain and guard your overall mix in dual mono or stereo operation. At the heart of the 1066 is our new dbx V2 VCA.

Developed especially for the dbx 1066 compressor / limiter / gate, 1046 and other 10 series products to come, this revolutionary VCA boasts superb dynamic range characteristics while maintaining very low distortion and almost immeasurable noise characteristics. The bottom line is this: a new VCA working in conjunction with world class design makes the dbx 1066 perform better than compressors selling for hundreds more. State-of-the-technology VCA’s, meticulous component selection, and scrupulous testing procedures are just a few more reasons that the new dbx 1066 is the latest in a long line of pedigreed dbx signal processors. When you’re cleaning up tracks in the studio or perfecting your live sound, you want to focus on your craft, not your hardware. Found in studios everywhere, dbx compressors, limiters, and gates are both easy to use and reliable. Built with flexibility and versatility in mind, dbx compressors, limiters, and gates enhance the quality of your performance without slowing you down.

Recommended for: Portable, Tour, Studio.

Features

DBX 1066 Compressor / Limiter / Gate Features:

  • Selectable auto (classic dbx®) or manual (variable Attack and Release) compression
  • Contour switch removes unwanted low frequency information from detector circuit
  • Selectable Overeasy® or Hard Knee compression modes
  • PeakStopPlus™ limiting for setting maximum allowable level with minimal distortion
  • SC Ext and SC Mon for setting up and monitoring external devices for gating function
  • True differentially balanced gold-plated XLR and 1/4″ inputs and outputs
  • True RMS level detection
  • Precision metering of input level, output level, and gain reduction
  • True stereo or dual mono operation
  • Switchable +4dBu or -10dBV operation per channel

Specifications

DBX 1066 Compressor / Limiter / Gate Specifications:

Input ConnectorsXLR and 1/4″ TRS (Pin 2 and tip hot)
Input TypeElectronically balanced/unbalanced, RF filtered
Input ImpedanceBalanced > 50 kOhm, unbalanced >25 kOhm
Max Input> +24 dBu balanced or unbalanced
CMRRTypically >50 dB at 1 kHz
Output ConnectorsXLR and 1/4″ TRS (Pin 2 and tip hot)
Output TypeServo-balanced/unbalanced, RF filtered
Output ImpedanceBalanced 120 Ohm, unbalanced 60 Ohm
Max Output> +21 dBm balanced, > +20 dBm unbalanced
Sidechain Input Connector1/4″ Unbalanced (Tip-Sleeve)
Sidechain Input TypeUnbalanced, RF filtered
Sidechain Impedance>10 kOhm
Sidechain Max Input Level>+24 dBu
Sidechain Output Connector1/4″ Balanced TRS (tip hot)
Sidechain Output TypeImpedance balanced, RF filtered
Sidechain Output ImpedanceBalanced 2 kOhm, unbalanced 1 kOhm
Sidechain Max Output Level>+21 dBu balanced or unbalanced
Bandwidth20 Hz to 20 kHz, +0/0.5 dB
Frequency Response0.35 Hz to 90 kHz, +0/-3 dB
Noise< -95 dBu, unweighted, 22 kHz measurement bandwidth
Dynamic Range> 118dB, unweighted
THD+Noise0.008% typical at +4 dBu (1 kHz unity gain), 0.08% typical at +20 dBu (1 kHz unity gain), < 0.1% any amount of compression up to 40 dB, 1 kHz
IMD< 0.1% SMPTE
Interchannel Crosstalk< -80 dB 20Hz to 20 kHz
Stereo CouplingTrue RMS Power Summing
Compressor Threshold Range-40 dBu to +20 dBu
Compressor Ratio1:1 to infinity:1
Compressor Threshold CharacteristicSelectable OverEasy® or hard knee
Compressor Attack/Release CharacteristicAutoDynamic™
Compressor Attack/Release ModesSelectable Manual or Auto
Compressor Manual Attack TimeScalable program-dependent
Compressor Manual Release TimeScalable program-dependent
Compressor Auto Attack TimeProgram-dependent
Compressor Auto Release TimeProgram-dependent
Compressor Output Gain-20 to +20 dB
Limiter Threshold Range+4 dBu to +24 dBu (off)
Limiter Ratioinfinity:1
Limiter TypePeakStopPlus® two-stage limiter
Limiter Stage 1PeakStop® brickwall limiter
Limiter Stage 1 Attack TimeZero
Limiter Stage 1 Release TimeZero
Limiter Stage 2Predictive intelligent program limiter
Limiter Stage 2 Attack TimeProgram-dependent
Limiter Stage 2 Release TimeProgram-dependent
Expander/Gate Threshold RangeOff to +15dBu
Expander/Gate Ratio1:1 to 30:1
Expander/Gate Attack Time< 100 µsec
Expander/Gate Release TimeProgram-dependent
SC Ext. SwitchRoutes the external sidechain input signal to the detector
SC Mon. SwitchRoutes the sidechain signal to the output, interrupting the normal audio
OverEasy® SwitchActivates the OverEasy compression function
Countour SwitchActivates the frequency-dependent detector function
Auto SwitchActivates automatic program-dependent attack and release times, disabling the manual Attack and Release controls
I/O Meter SwitchSwitches between monitoring input and output levels on the Input/Output Level meter
Bypass SwitchActivates the direct input-to-output hard-wire relay bypass. Relay automatically hard-wire bypasses unit at power-down and provides a power-on delay of 1.5 sec.
Operating Level Switch(rear panel) Switches the nominal operating level between -10 dBV and +4 dBu simultaneoulsy for both input and output levels
ST Link SwitchLink both channels for stereo operation. Channel One becomes the master
Gain Reduction Meter12-segment LED bar graph at 1, 2, 4, 6, 9, 12, 15, 18, 21, 24, 27 and 30 dB
I/O Meter8-segment LED bar graph at -24, -18, -12, -6, 0, +6, +12, and +18 dBu
Compressor Threshold Meter3-segment LED bar graph at Below (-), OverEasy and Above (+)
Expander/Gate Threshold Meter2-segment LED bar graph at Below (-) and Above (+)
Limiter Threshold Meter1 LED to indicate PeakStopPlus™ limiting
Function SwitchesLED indicator for each front-panel switch
Output Transformer OptionsJensen® JT-123-dbx or JT-11-dbx, BCI RE-123-dbx or RE-11-dbx
Operating Voltage100-120 VAC 50/60 Hz 200-240 VAC 50/60 Hz
Power Consumption20 Watts
Fuse100-120 VAC:250 mA Slow Blow, 200-240 VAC:125 mA Type T
Power ConnectorIEC receptacle
Dimensions1.75″Hx19″Wx9″D (4.4cmx48.3cmx20.1cm)
Unit Weight5.1 lbs. (2.3 kg)
Shipping Weight7.5 lbs. (3.4 kg)

Additional information

Weight7.5 lbs
Dimensions9 x 19 x 1.75 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.