DBX ZC9 Wall-Mounted Zone Controller

DBX
Compare
  • 2 RJ – 45 Connectors
  • Up To 6 Zone Controllers
  • Cat5 or Cat5E Compatible

$85.00 CAD

SKU: 691991400865 Category: Tag: Model Number: ZC-9

Description

About DBX ZC9 Wall-Mounted Zone Controller

The Zone Controllers offer extended utility to the DriveRack® and ZonePRO™ families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted rj-45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor.

ARCHITECTS’ AND ENGINEERS’ SPECIFICATIONS:

The dbx ZC9 wall-mounted zone controller provides a rotary switch source selection for the ZonePro 1260 and 1261. The remote shall have DIP switch identification and connection to the device being controlled shall be via CAT 5 cable and RJ-45 connectors. The device shall be a dbx ZC9 wall-mounted zone controller. The Zone Controllers offer extended utility to the SC, DriveRack®; and ZonePRO families. The nine Zone Controllers provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety interface.

Recommended for: Installed.

Specifications

DBX ZC9 Wall-Mounted Zone Controller Specifications:

Connectors(2) RJ-45
Series WiringMaximum Cable Length varies with number of Zone Controllers. For Example,Three Zone Controllers: 600 ft. Six Zone Controllers: 300 ft.
Parallel Wiring using ZC-BOBUp to Six Zone Controllers: 1000 ft.
Parallel Wiring CableCAT5 or CAT5E with 28.6 Ohm/M (Ohm/1000ft.) nominal DCR and rated VW-1 or higher.
Safety Agency CertificationsUL 60065, IEC 60065, EN 55013, E60065

Additional information

Weight.7 lbs
Dimensions2.75 x 4.5 x 1.69 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.